| |
Abaqus 6.8 & 6.8-EF Supported
Platforms & Products
- Click the release number to highlight platforms included with each release.
- Click the word 'Release' to clear highlighting.
- Supported Platforms and products for maintenance releases 6.8-2 and higher are the same as Abaqus 6.8-1.
- Availability dates are listed below.
| |
6.8-1 |
May 29, 2008
|
| |
6.8-2 |
August 8, 2008
|
| |
6.8-EF |
November 17, 2008 |
| |
6.8-3 |
December 3, 2008
|
| |
6.8-EF2 |
March 9, 2009 |
| |
6.8-4 |
March 16, 2009 |
| |
6.8-EF3 |
July 10, 2009 |
| |
6.8-5 |
July 21, 2009 |
Notes:
- Abaqus Interactive and Analysis products use 64-bit addressing, unless
noted otherwise.
- Abaqus/Standard uses double floating point precision; Abaqus/Explicit
offers both single and double floating point precision. Abaqus/CAE and
Abaqus/Viewer use single floating point precision.
- MPI based parallel execution of Abaqus/Standard and Abaqus/Explicit is available on all supported platforms except Windows/x86-32, which supports thread based shared memory parallel execution.
- See Abaqus Answer 3097 for more information about DMP on Windows/x86-64
- 3Dconnexion SpaceBall motion controllers are supported and can be used for view manipulation in Abaqus/CAE and Abaqus/Viewer.
- Includes Abaqus/Foundation as well as Abaqus/Aqua and Abaqus/Design.
- Includes Intel Pentium and Xeon, and AMD Athlon processors and use 32-bit memory addressing.
- Includes AMD Opteron and Intel EM64T processors.
- XFree86 is required.
- Linux/x86-32 and HP-UX/Itanium platforms are designated as limited distribution status for Abaqus 6.8-EF. These platforms will be qualified and supported using the same procedures as other platforms; however, Abaqus products and licensing will not be included on the Abaqus distribution media, but will be available by download when requested through your local SIMULIA office. See SOSS Answer 3817 for information about limited distribution platforms.
|
|
