System Configuration Analysis for Abaqus Version 6.5
We know that it is sometimes difficult to locate all the pertinent
information about an existing computer when contemplating the purchase or
upgrade of software. You need the host ID to request a license key. You
want to know if you need to upgrade your operating system to run the new
products. Will you need different compilers? Does your system have enough
memory?
The programs available for download from this page have been designed
to aid in the comparison of a current system and the system requirements
for Abaqus. If you already have Abaqus loaded on the computer you can get
the same information using the command:
abaqus info=system
If you would like to verify the configuration of your own computer,
select the appropriate platform from the table below. Click on the
platform name and download the file indicated from the window that
appears. The files can be placed in any directory where you have full
access.
On UNIX platforms uncompress and untar the downloaded file. Change
directories to the sysinfo directory, then execute the file
sysinfo.csh, as follows: uncompress sysinfo.tar.Z
tar -xvf sysinfo.tar
cd sysinfo
./sysinfo.csh
On Linux platforms download the file sysinfo.tar.gz,
expand it and untar it. Change directories to the sysinfo
directory, then execute the file sysinfo.csh, as follows: gunzip sysinfo.tar.gz
tar -xvf sysinfo.tar
cd sysinfo
./sysinfo.csh
On Windows platforms download the file sysinfo.zip and
expand it using WinZip by double-click the file icon in the Explorer. In a
command window, set you current directory to the sysinfo directory
and run the sysinfo.bat file, as follows: cd sysinfo
sysinfo
If you do not have a version of WinZip one can be
downloaded from the WinZip homepage.
The sysinfo programs use various system commands to extract information
from your computer. The information available to users with no special
access privilege is extracted; commands that require special (root)
privilege to extract information are not included. The programs were
developed for English-based operating systems. If you installed your
operating system in a language other than English, some of the information
may not be retrievable.
After running the program, you should have a report similar to the
following. Compare this report to the system
requirements for Abaqus Version 6.5 to determine whether modifications
to your computer might be needed.
Running system configuration checks for Linux/x86-32.
Please wait until all the needed information has been gathered...
Current system configuration is:
Date: Fri Mar 16 04:30:00 2004
Processor: Intel(R) Xeon(TM) CPU 3.06GHz 3056.903 MHz
Number of CPUs: 2
Linux Distribution: Red Hat Linux release 9 (Shrike)
Memory: 2016 Mb
Graphics Card: nVidia Corporation NV25GL [Quadro4 750 XGL] rev 163
X11 Version: 4.3.0-2
OpenGL Version: 4.3.0-2
X Server:
server glx version string: 1.3
client glx version string: 1.3
OpenGL version string: 1.3.4145
glu version: 1.3
Disk Space:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 4933404 4385660 297132 94% /
/dev/sda5 19694836 6923880 11770512 38% /a
/dev/sda6 41975364 25362156 14480984 64% /scratch
System requirement status is:
Requirement: SuSE 8.2, or 9.0, or Red Hat 9.0, or Red Hat Enterprise
3.0
Products: All Abaqus Products
Status: Pass - Found Red Hat Linux release 9 (Shrike)
Requirement: GNU Lib C 2.3.2 or greater
Products: All Abaqus Products
Status: Pass - Found GNU Lib C 2.3.2, which was installed with
glibc-2.3.2-27.9.7.rpm.
Requirement: Linux Kernel 2.4.20 or newer
Products: All Abaqus Products
Status: Pass - Found Linux Kernel 2.4.20-6smp.
Requirement: Processor must support SSE instruction set
Products: All Abaqus Products
Status: Pass
Requirement: Checking Hardware and Operating System
Products: All Abaqus Products
Status: Pass
Requirement: Intel 32-bits C++ Compiler 8.0 Build 20040318
Products: Abaqus/Make with C++
Status: Pass - Found Intel 32-bits C++ Compiler 8.0 Build
20040318.
Requirement: Intel 32-bits Fortran Compiler 8.0 Build 20040318
Products: Abaqus/Make with Fortran and Abaqus/User Subroutines
Status: Pass - Found Intel 32-bits Fortran Compiler 8.0 Build
20040318.
Requirement: LAM MPI Version 7.0.4 or MPICH MPI Version 1.2.5
Products: Abaqus Analyses using MPI-based parallelization
Status: Pass - Found LAM MPI 7.0.4.
Requirement: Mesa 4.3.0 or greater
Products: Abaqus/CAE and Abaqus/Viewer
Status: Pass - Found Mesa 4.3.0
Requirement: XFree86 server must load the glx module
Products: Abaqus/CAE and Abaqus/Viewer
Status: Pass
Requirement: Netscape 6.0, Mozilla 1.2, Firefox 0.8, or greater
Products: Abaqus Documentation
Status: Fail - Unable to determine type and version of Web
Browser on this system.
Not all requirement checks succeeded.
|
