SIMULIA
My Support | About SIMULIACareersContact Us | Dassault Systèmes
  SUPPORT
My Support
Documentation
Licensing
Quality Assurance
Status Reports
System Information

 
 

Abaqus for CATIA V5 Compatibility Matrix

Use the matrix below to identify compatible releases of AFC for corresponding releases of CATIA V5.

AFC Compatibility Matrix Abaqus for CATIA V5
V2.5-1 V2.5-2 V2.5-4 R18 SP4 R19 R19 SP3 R20

CATIA

R20 (32- and 64-bit)            
R19 (32- and 64-bit)         5  
R18 (32- and 64-bit)   1 1 4      
R17 64-bit 2 2 2        
R17 32-bit 3 3        
Abaqus 6.9            
6.8          
6.7    
6.6  
6.5          

General Note: All Service Packs for CATIA V5 releases listed in the table are supported unless noted.

1 AFC V2.5-2 & AFC V2.5-4 support only the following service packs of CATIA V5 R18: SP0 (GA), SP1, and SP2. R18 SP3 and higher are not supported.
2 AFC Complete with R17 64-bit requires R17 SP7 or higher.
3 AFC V2.5-2 running with a 32-bit CATIA R17 installation supports only Abaqus 6.5 and 6.6. Abaqus 6.7 is not supported.
4 AFC R18 SP4 requires V5 R18 SP4 or higher service packs.
5 AFC R19 SP3 requires V5 R19 SP3 or higher service packs.


Legend

Supported

 

 

 
© Dassault Systèmes, 2004, 2010 - All Rights Reserved
Terms of Use | Trademarks | Privacy Statement